Licensed & Insured, in Victorville and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Victorville
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (760) 493-7495 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Victorville and surrounding areas · On-site visits included · Free estimate within 24h
Victorville Metal Roofing is a team of local certified professionals based in Victorville. We respond quickly in Victorville and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (760) 493-7495⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews
“Had these guys put up metal roofing on our equipment hangar out past the edge of town, and they handled the whole thing in about three weeks. The desert wind and sun are brutal out here, so I wanted something that would actually last. Crew was solid, cleaned up every scrap of metal, and the panels are straight as an arrow.”
Commercial Metal Roofing
“We were dreading tearing off the old shingles on our back porch roof, but they talked us into a retrofit instead and saved us a ton of hassle. Only took two days and the flashing around the edges looks better than the original. Small thing, but I wish they'd given me a heads up before starting a day early.”
Metal Roof Over Shingles (Retrofit)
“These folks installed corrugated metal roofing on our storage building out in the desert and it came out great. The heat out there is no joke and they worked through it without a single complaint. Really impressed with how fast they moved once the materials showed up.”
Commercial Metal Roofing
“Went with standing seam for our house after getting three quotes, and Victorville Metal Roofing was the only one that actually explained the difference between the panel types instead of just pushing the cheapest option. The finished roof looks sharp and the seams are perfectly aligned. Worth every penny.”
Standing Seam Metal Roofing
“Had a leak around our skylight that two other roofers couldn't figure out. These guys found the bad flashing in about ten minutes and had it sealed up the same afternoon. No more drips during the last rain, and they didn't try to sell me a whole new roof.”
Flashing, Chimney & Skylight Repair
“Brand new metal roof on our place out in the desert and we couldn't be happier. They used stone-coated steel so it matches the look of the neighborhood instead of that shiny industrial vibe. Took about a week start to finish and the cleanup was spotless, didn't find a single screw in the yard.”
Metal Roof Installation
“Our old metal roof was rusted through in spots and they replaced the whole thing, including new fasteners and fresh flashing around the vents. The crew of four knocked it out in three days flat. Only reason it's not five stars is they left a small pile of old panels by the curb that I had to haul off myself.”
Metal Roof Replacement
“We built a new house out in the desert with xeriscaping all around, and these guys did the metal roof to match. They recommended a lighter color to cut down on heat gain and honestly the electric bill has been noticeably lower this summer. Really grateful they steered us that direction.”
Metal Roof InstallationReal photos of our work in Victorville · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $8/sq ft | Includes tear-off, synthetic underlayment, and concealed-fastener panels; pitch and roof complexity move the price. |
| Stone-coated steel installation | Starting at $9/sq ft | Includes granule-finished panels and full flashing detail; HOA design review and cut-up roofs add cost. |
| Corrugated and ribbed panel installation | Starting at $7/sq ft | Includes exposed-fastener panels and new fasteners; barns, shops, and simple gable roofs price lower. |
| Complex or large-scale job | On estimate | Steep two-story roofs, skylights, chimneys, and historic or HOA review need an on-site look first. |
| Travel | Included | In Victorville and surrounding Victor Valley communities, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (760) 493-7495, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam, 26-gauge | Starting at $10/sq ft | Includes tear-off, underlayment, panels and trim on a standard-pitch ranch roof. |
| Mechanically seamed 24-gauge | Starting at $13/sq ft | Double-locked seams for wind-exposed lots in Oak Hills, Phelan and Adelanto. |
| Standing seam over existing shingles | Starting at $9/sq ft | Retrofit with battens where code allows a recover over one layer. |
| Complex or steep-pitch roof | On estimate | Valleys, dormers and steep pitches need an on-site look before we quote. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Full tear-off, deck inspection, new underlayment, corrugated or ribbed panels with washered fasteners included. |
| Stone-coated steel replacement | Starting at $13/sq ft | Tear-off and new steel tile or shingle system; price moves with roof pitch and HOA color requirements. |
| Standing seam replacement | Starting at $16/sq ft | Concealed-fastener panels, new flashing, and trim; complex hips and valleys raise the per-foot cost. |
| Decking repair and flashing | On estimate | Rotted sheathing, chimney, and skylight flashing priced after tear-off reveals actual conditions. |
| Travel | Included | in Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated or ribbed panel over shingles | Starting at $7/sq ft | Includes battens, fasteners, and basic flashing; price rises with pitch and deck repairs. |
| Standing seam over shingles | Starting at $11/sq ft | Concealed fasteners and vented batten system; higher cost for complex roofs and multiple valleys. |
| Stone-coated steel over shingles | Starting at $10/sq ft | Textured steel tile look; HOA-approved profiles cost more on steep or cut-up roofs. |
| Deck repair and re-flashing | On estimate | Rotten sheathing and chimney or skylight flashing need an on-site look before pricing. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, boots, short seam) | Starting at $450 | Covers small fixes like screw and gasket replacement, pipe boots, and short seam re-seals. |
| Panel replacement (wind or impact damage) | Starting at $850 | Includes removing bent panels, installing matching-profile replacements, and new fasteners and sealant. |
| Flashing and penetration repair | Starting at $650 | Rebuilds chimney, skylight, and sidewall flashing with counterflashing and UV-rated sealant. |
| Leak tracing and diagnostic | Starting at $350 | Water testing and attic inspection to find the true entry point before any repair is quoted. |
| Complex or large-scale job | On estimate | Multi-panel damage, steep or hard-access roofs, and storm work need an on-site look first. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and washer leak repair | Starting at $450 | Includes leak trace, replacement of failed screws and washers, and water test verification. |
| Flashing and penetration reseal | Starting at $650 | Covers pipe boots, vents, and small flashing details, with cost rising for chimney or skylight work. |
| Seam and panel repair | Starting at $750 | For separated standing seams or lifted panel edges, priced by the number of seams affected. |
| Emergency tarping after storm | Starting at $550 | Temporary weatherproofing to stop active leaks until a permanent repair can be scheduled. |
| Complex or multi-point leak | On estimate | Needs an on-site look when the leak source is unclear or several failure points are found. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot re-fastening (small roof or single slope) | Starting at $750 | Covers inspection, replacement of up to 25 failed screws with UV-rated washers, and resealing of those penetrations. |
| Full roof re-screw (residential) | Starting at $1,450 | Replaces every failed fastener across the roof, re-torques sound screws, and includes a written fastener report. |
| Ridge cap, trim, and penetration rework | Starting at $950 | Re-secures loose ridge caps and trim and re-seals vents, boots, and laps opened by wind or heat cycling. |
| Commercial or agricultural metal roof re-fastening | On estimate | Large panel counts, steep or high access, and barn or shop roofs need an on-site count before pricing. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, simple structure | Starting at $5.50/sq ft | Includes panels, fasteners, closures, and trim; price moves with pitch and access |
| R-panel or 5V roof, residential or shop | Starting at $6.75/sq ft | Stiffer profile and heavier screw pattern for wind exposure; gauge and color affect price |
| Barn, horse shelter, or agricultural building | On estimate | Purlins, framing condition, and span must be inspected before a number is given |
| Panel replacement over sound framing | Starting at $4.50/sq ft | Reuses existing purlins after inspection; covers tear-off, panels, and new closures |
| Travel | Included | in Victorville and surrounding High Desert areas, no separate mileage fee |
| Estimate | Free | Response within 24 hours at (760) 493-7495, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement | Starting at $9/sq ft | Includes tear-off of existing shingles, new underlayment, and standard flashing on a simple pitch. |
| Metal shingle roof over shingles (retrofit) | Starting at $7/sq ft | Includes underlayment and panel install over one existing layer, subject to local code limits. |
| Stone-coated steel shingle upgrade | Starting at $11/sq ft | Includes granule-coated panels, premium underlayment, and color-matched trim for a tile or shake look. |
| Complex or steep-pitch roof | On estimate | Needs an on-site look because multiple valleys, skylights, and steep pitches raise labor and flashing cost. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Includes tear-off, underlayment, flashing and panels on a standard-pitch roof with good deck condition |
| Tile-look or shake-look premium profile | Starting at $11/sq ft | Higher panel cost and more cuts at hips and valleys, common on HOA-reviewed stucco tracts |
| Two-story or steep-pitch install | Starting at $13/sq ft | Added labor and safety setup for steep pitches, tall walls and complex roof geometry |
| Deck repair and sheathing replacement | On estimate | Priced after tear-off reveals soft or delaminated sheathing, which we photograph before quoting |
| Travel | Included | in Victorville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window, entry) | Starting at $20/sq ft | Includes formed copper pans, soldered flashings, and trim; small square footage and access drive the final number. |
| Full copper standing-seam roof | Starting at $28/sq ft | Includes shop-fabricated pans, underlayment, and soldered details; roof complexity and deck condition move the price. |
| Zinc or aluminum specialty roof | Starting at $22/sq ft | Includes custom profile panels and formed trim; metal choice and panel length determine the installed rate. |
| Custom flashing and trim fabrication | On estimate | Chimney, skylight, and wall flashings priced per detail after an on-site measurement of each penetration. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard reflective coating | Starting at $2.50/sq ft | Includes wash, light rust treatment, and one reflective coating system on sound panels. |
| Rust treatment and primer package | Starting at $3.25/sq ft | Adds rust conversion, spot priming, and fastener washer replacement on corroded roofs. |
| Full prep and recoat on large shop or barn | On estimate | Roof size, pitch, and access rigging require an on-site look before pricing. |
| Color restoration on standing seam or metal shingle | Starting at $2.75/sq ft | Direct-to-metal paint over chalked panels with no active rust or fastener issues. |
| Travel | Included | in Victorville and surrounding Victor Valley areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single skylight flashing repair | Starting at $600 | Covers one skylight curb with new flashing and sealant, assuming standard pitch and no rot. |
| Chimney step flashing repair | Starting at $600 | Includes removal of failed flashing and custom-bent replacement; masonry condition drives the price up. |
| Valley or stucco transition repair | Starting at $750 | New metal valley or reglet counter-flashing; access and wall height affect the final figure. |
| Multi-penetration or cricket build | On estimate | Several leaks or a chimney cricket need an on-site look before we quote a number. |
| Travel | Included | in Victorville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted guard layout, single-story roof | Starting at $1,200 | Pads or bars over main drop zones, includes hardware and fasteners for one eave run. |
| Full eave run, standing seam roof | Starting at $2,400 | Clamp-on guards across the full eave, priced by linear footage and seam profile. |
| Barn or shop guard system | Starting at $2,800 | Bar or rail guards over doors and equipment zones on long low-pitch panel runs. |
| Guard plus gutter and eave detailing | On estimate | Needs a site look to price gutter hangers, closures, and downspout changes together. |
| Travel | Included | in Victorville and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic check with photo documentation, no obligation to book repair work |
| Minor panel and fastener repair | Starting at $350 | Replaces a few lifted panels and re-fastens the surrounding field, price rises with pitch and height |
| Flashing and seam re-seal | Starting at $500 | Resets lifted seams and replaces torn flashing at chimneys and skylights, access drives the number |
| Full slope replacement | On estimate | Needs an on-site look to price panel profile, slope size and color matching |
| Insurance documentation package | Included with repair | Photo set, measurements and written damage summary prepared for your adjuster |
| Estimate and response | Free | Response within 24 hours at (760) 493-7495, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential metal roof inspection | Free estimate | Includes full roof walk, fastener and seam check, flashing review and written summary with photos. |
| Standalone inspection with written report | Starting at $150 | For buyers, lenders or insurers needing documented condition and remaining service life; price rises with roof size and pitch. |
| Large or complex roof (multi-plane, steep, many penetrations) | On estimate | Steep pitches, multiple roof levels and heavy flashing detail require on-site assessment before quoting. |
| Barn, shop or agricultural metal roof inspection | On estimate | Larger square footage and panel counts on Oak Hills, Phelan and Adelanto properties need an on-site look. |
| Travel | Included | In Victorville and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (760) 493-7495, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, 5-inch | Starting at $9/linear ft | Formed on site with hangers and end caps; run length and story height move the price |
| Seamless aluminum gutter, 6-inch | Starting at $12/linear ft | Higher-capacity trough for large panel roofs; downspout count and corners affect cost |
| Steel gutter with panel brackets | Starting at $15/linear ft | Heavy-duty hangers for barns and shops; eave height and access drive the number |
| Debris screens and downspout extensions | Starting at $4/linear ft | Screens shed desert dust and seed; discharge distance from walls affects pricing |
| Complex or large-scale job | On estimate | Multi-level roofs, long runs, and tricky access need an on-site look before a number |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or shop re-roof (corrugated) | Free estimate | Includes tear-off, new underlayment, and fastening; price moves with square footage and purlin condition. |
| Standing seam commercial roof | Starting at $9 per sq ft | Concealed fasteners and clean seams; final cost depends on panel gauge, pitch, and access. |
| Insulated panel system | On estimate | Needs an on-site look to size insulation, framing, and panel span before pricing. |
| Repair and re-fastening | Starting at $350 | Covers screw replacement and resealing; rises with leak count, height, and panel damage. |
| Travel | Included | In Victorville and surrounding High Desert areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (760) 493-7495, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Victorville want a crew that understands the Mojave high desert, not a coastal company guessing at local conditions. At Victorville Metal Roofing, our network of licensed, bonded, and insured local contractors installs, replaces, re-roofs, and repairs metal roofing across the Victor Valley. We work on the low-pitch stucco ranches near Old Town, the tile and shingle tract homes across Southeast Victorville and Mountain View Acres, the lakeside properties in Spring Valley Lake, and the desert ranchettes, barns, and shops out on the Oak Hills, Phelan, and Adelanto flats.
The sun here bakes roofing, spring winds off the Cajon Pass scour and lift panels, and a large stock of 15 to 30 year old screw-down roofs is now due for fastener service. Whether you need a metal roof repair or a full replacement, we serve Victorville, Hesperia, Apple Valley, Adelanto, and Oak Hills with straight guidance on what your roof actually needs.
Most metal roof leaks in Victorville trace back to a short list of causes. On 15 to 30 year old exposed-fastener roofs, the number one culprit is fasteners backing out as their EPDM sealing washers dry, shrink, and crack under relentless sun. Once the washer fails, water walks in around the screw. Seams separate as panels expand and contract through triple-digit summers and cool desert nights. Pipe boots and flashing at chimneys, skylights, and valleys fail at the sealant and metal transitions. Spring winds can lift and peel panels, and fallen limbs from desert willows or mesquite can puncture a panel outright.
Ignoring these failures is expensive. Water tracks along purlins and decking far from the entry point, so a small leak at a fastener can rot sheathing and saturate insulation several feet away before a stain shows on your ceiling. That is why we start with a metal roof leak repair inspection that finds the actual source, not just the wet spot.
The honest call between repair and replacement depends on panel condition, fastener age, and decking. Often a full screw replacement with new sealing washers and proper torque restores a watertight roof for a fraction of replacement cost, and we will tell you plainly when that is the right answer. When it is not, we say so. Call (760) 493-7495 or request a free estimate to get a straight assessment.
We match the system to the home, the budget, and the exposure. Standing Seam Metal Roofing uses concealed clips and no exposed fasteners, making it the premium choice for the high-desert sun. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and distinctive homes.
The tradeoff is simple: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Where the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; where it is not, tear-off is the right call. We will tell you which applies to your roof.
Metal roof installation in Victorville is typically quoted per square foot, while repairs are often flat-rate. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame all figures as typical ranges because final pricing depends on the roof and site conditions, and we never quote a firm number before seeing the roof.
Some carriers may offer premium discounts for metal or impact-rated roofs, though that is between you and your insurer. For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can give you an honest, site-specific number.
After a wind or monsoon storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements must be verified locally. Historic district or HOA design review can also restrict panel profile and color choices.
We handle the paperwork we are permitted to handle and keep you informed, but we do not give legal or code advice. Requirements vary. Always verify with the Victorville building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Victorville Metal Roofing serves in Victorville and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Victorville · Response within 24h · No commitment · ☎ (760) 493-7495
Your Free Quote Request