Serving the Victorville area  ·  (760) 493-7495  ·  Open Mon-Sun 7am-7pm
📞 (760) 493-7495 Free Quote

Metal Roofing in Rialto, CA (92376) · Local Professionals

Victorville Metal Roofing · Fast response in Rialto and the Victorville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rialto sits right where the Cajon Pass spills into the Inland Empire, and that location defines the roofing problem here. The 1950s and 1960s ranches along Riverside Avenue and near Rialto Avenue were built with low-pitch shingle roofs that have baked through decades of triple-digit summers, while the newer stucco subdivisions off Ayala Drive and up toward the foothills face the same Santa Ana winds that scour the pass every fall.

We are Victorville Metal Roofing, and we serve Rialto (92376) because we know this climate from the inside out. When a homeowner near Frisbie Middle School calls us about a wind-peeled panel or a shingle roof that is finally giving out, we bring the same desert-tough approach we use in Victorville and the high desert: metal that reflects heat, holds fasteners, and stands up to the gusts that funnel through Rialto.

Metal Roofing in Rialto (92376)

Rialto is not a flat, easy town for roofing. The city sits at the base of the San Bernardino Mountains, and the terrain rises quickly as you move north toward the foothills. Many lots in the older neighborhoods are narrow with mature trees, which means tight access for staging materials and careful handling of long panels. The soil is sandy and gravelly in places, and drainage matters: a sudden monsoon downpour can send water sheeting off a roof faster than the old shingle system ever handled. We see a lot of 1950s and 1960s stucco ranches with low-slope roofs that are prime candidates for a metal retrofit, and we also work in the newer stucco tract homes where stone-coated steel is a popular upgrade because it matches the tile look while shedding heat far better.

Our team has installed standing seam, corrugated panels, and stone-coated steel across the Victor Valley, and we bring that experience to every Rialto job. We understand how the Cajon Pass winds can lift a poorly fastened panel and how the relentless sun breaks down sealants and fasteners over time. We also know the local building department and what it takes to get a re-roof permitted and inspected correctly.

Our services in Rialto

How a Job Works in Rialto

Step 1: You call us at (760) 493-7495 or request a free estimate online. We schedule an on-site assessment at your Rialto property, usually within a few days. We inspect the existing roof, check the attic and flashing points, measure the roof area, and talk with you about what you want: a full replacement, a retrofit over shingles, or a repair. We provide a written estimate with clear pricing, no pressure.

Step 2: Once you approve, we pull the required permits from the City of Rialto and coordinate any HOA design review if your neighborhood has one. On installation day, our crew arrives with materials staged carefully, especially on tight lots where we need to keep driveways and sidewalks clear. We remove the old roofing, inspect and repair the decking as needed, and install the new metal roof with fasteners rated for high-wind zones. We protect your landscaping and keep the site secure each evening.

Step 3: When the work is done, we do a full cleanup, magnet-sweep the yard and driveway for nails, and walk the roof with you. We show you the finished job, explain the warranty, and make sure you are satisfied before we leave. We leave your property clean and your roof ready for the next Santa Ana wind event.

Pricing for metal roofing in Rialto depends on the size of your roof, its pitch and complexity, the material you choose, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Stone-coated steel and metal shingle systems start at $9 per square foot. For smaller jobs, metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing or skylight repair at $600. We give free estimates, so call (760) 493-7495 and we will come out to your Rialto home, measure, and give you a firm number.

My 1960s ranch near Rialto Avenue has a low-pitch shingle roof. Can you install metal over it or do I need a full tear-off?
It depends on the condition of the existing shingles and the number of layers. California code limits how many layers you can have, and low-slope roofs often need a tear-off to inspect the decking. We will check during the free estimate and tell you honestly whether a retrofit or full replacement makes sense for your Rialto home.
A windstorm just peeled back some panels on my roof off Ayala Drive. How fast can you respond?
We prioritize storm and wind damage calls in Rialto. Call us at (760) 493-7495 and we will schedule an inspection, usually within 24 to 48 hours depending on demand. We can tarp or secure the roof to prevent further damage and provide a written repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Rialto?
For a 1,500 square foot ranch with a simple gable roof, a metal roof replacement typically starts around $9 per square foot, so you are looking at roughly $13,500 and up, depending on material, pitch, and whether any decking repairs are needed. Stone-coated steel and standing seam run higher. We give exact quotes after measuring.
Do I need a permit from the City of Rialto to replace my roof?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Rialto, and the threshold and fees vary. We handle the permit application and inspections for you. We always defer to the City of Rialto Building Department for the final word on requirements.
My HOA requires a tile-look roof. Can you match that with metal and still get approval?
Yes. Stone-coated steel roofing comes in profiles and colors that mimic clay tile or Spanish tile, and many Rialto HOAs approve it once they see the samples. We can provide product literature and color samples to submit for design review, and we coordinate with your HOA to make sure the installation meets their rules.
Are you fully insured for work at my Rialto property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Rialto's heat and wind?
Once a year, especially after the Santa Ana wind season, check for loose fasteners, debris in valleys, and worn sealant around flashing and penetrations. We offer inspections and maintenance plans. Keeping fasteners tight and flashing sealed is the best way to prevent leaks in our desert climate.
Why choose us?

Trusted professionals in Victorville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Victorville

All your work handled by qualified professionals in Victorville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Victorville

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Victorville · Response within 24h · No commitment · ☎ (760) 493-7495

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Victorville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm