Serving the Victorville area  ·  (760) 493-7495  ·  Open Mon-Sun 7am-7pm
📞 (760) 493-7495 Free Quote

Metal Roofing in Lucerne Valley, CA (92356) · Local Professionals

Victorville Metal Roofing · Fast response in Lucerne Valley and the Victorville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (760) 493-7495
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lucerne Valley is a high desert community where the lots are big, the sun is relentless, and the wind comes screaming off the Mojave. Most homes here are ranch-style or manufactured houses on acreage, many with outbuildings, shops, and barns that need a roof as tough as the people who live here. If you're near the Lucerne Valley Market & Hardware or out on Rabbit Springs Road, you know that a roof has to handle triple-digit summers, spring gusts, and the occasional monsoon downpour.

That's why homeowners in Lucerne Valley (92356) call Victorville Metal Roofing. We've worked on everything from old farmhouses off Highway 18 to newer desert ranchettes near the Lucerne Valley Community Center, and we know the local terrain, the wind patterns, and the building codes that apply out here. Our team is based just down the road in Victorville, so we're familiar with the unique challenges of roofing in the high desert.

Metal Roofing in Lucerne Valley (92356)

Lucerne Valley sits on a sandy, gravelly plateau where the ground shifts and drainage can be tricky. Many properties are on large lots with dirt driveways and limited access, so getting materials and equipment to the roof requires careful planning. The intense sun bakes asphalt shingles until they crack and curl, and the spring winds can lift panels and tear off shingles. We often see wind-lifted panels, failed fasteners, and leaks around flashing and seams. Metal roofing is a smart choice here because it reflects heat, stands up to wind, and lasts for decades. We install corrugated and ribbed panel roofing, standing seam, stone-coated steel, and metal shingles, and we also do repairs and replacements. Whether your place is a small cabin or a large shop, we can handle it.

Our team has been serving Lucerne Valley and the surrounding Victor Valley area for years. We understand the local building department requirements (permits are typically needed for replacements, and rules vary), and we can help you navigate the process. We're fully insured with general liability and workers' compensation, so you're protected.

Our services in Lucerne Valley

How a Job Works in Lucerne Valley

Step 1: Give us a call at (760) 493-7495 or request a free estimate online. We'll schedule a time to come out to your property, inspect your current roof, and discuss your options. We'll take measurements, check for damage, and provide a written estimate with no obligation.

Step 2: Once you approve the estimate, we'll order materials and schedule the work. We'll handle the permit application with the local building department if required. On the day of installation, our crew will arrive early to beat the heat, protect your landscaping, and get to work. For larger properties, we'll coordinate access and staging to minimize disruption.

Step 3: After the job is done, we'll do a thorough cleanup, haul away all debris, and walk the property with you to make sure you're satisfied. We don't leave until you're happy with the result.

Pricing for metal roofing in Lucerne Valley depends on the size of your roof, the material you choose, and the condition of the existing roof. As a ballpark, corrugated and ribbed panel roofing starts at $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. Metal roof replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We also offer free inspections and estimates for storm damage. Call us at (760) 493-7495 to get a precise quote for your property.

My roof is constantly getting hammered by wind out on Highway 18 near the Mitsubishi Cement Plant. What's the best metal roofing for that exposure?
For high-wind areas like the west end of Lucerne Valley, we recommend standing seam metal roofing with concealed fasteners or corrugated panels with screws driven into solid sheathing. We also use wind-rated underlayment and reinforced fastening patterns. The key is proper installation and fastening, which we specialize in.
We just had a storm roll through and a section of our roof is missing. Can you come out today for an emergency repair?
Yes, we offer emergency storm damage repair. Call us at (760) 493-7495 and we'll dispatch a crew as soon as possible to secure your roof and prevent further damage. We also provide free inspections for insurance claims.
What's the typical cost to replace a roof on a 1,500 square foot house in Lucerne Valley?
For a 1,500 square foot house, a metal roof replacement typically ranges from $9,000 to $15,000 depending on the material and complexity. Corrugated panels are on the lower end, while standing seam is higher. We offer free estimates so you can get an exact price.
Do I need a permit to replace my roof in Lucerne Valley, and how long does it take?
Yes, San Bernardino County typically requires a permit for roof replacements. The process usually takes a few days to a couple of weeks depending on the workload. We handle the permit application for you and schedule inspections as needed.
My neighbor's tree branches hang over my roof and I'm worried about liability if they damage my roof. What can I do?
In California, you have the right to trim branches that overhang your property line, but it's best to talk to your neighbor first. If a branch falls and damages your roof, your insurance may cover it, but prevention is key. We can inspect your roof and recommend trimming or installing guards.
Are you fully insured for roofing work in Lucerne Valley?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance should I do on my metal roof in Lucerne Valley to make it last?
Inspect your roof twice a year, especially after windy seasons. Check for loose screws, debris in valleys, and damaged flashing. Clean gutters regularly and touch up any scratches. We offer maintenance plans and inspections to keep your roof in top shape.

Nearby service areas

📍 Victorville 92392📍 Hesperia 92345📍 Apple Valley 92307📍 Adelanto 92394
Why choose us?

Trusted professionals in Victorville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Victorville

All your work handled by qualified professionals in Victorville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Victorville

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Amanda K.
⭐⭐⭐⭐⭐
AK
Amanda K.
Adelanto

“Had these guys put up metal roofing on our equipment hangar out past the edge of town, and they handled the whole thing in about three weeks. The desert wind and sun are brutal out here, so I wanted something that would actually last. Crew was solid, cleaned up every scrap of metal, and the panels are straight as an arrow.”

Commercial Metal Roofing
Sarah W.
⭐⭐⭐⭐
SW
Sarah W.
Hesperia

“We were dreading tearing off the old shingles on our back porch roof, but they talked us into a retrofit instead and saved us a ton of hassle. Only took two days and the flashing around the edges looks better than the original. Small thing, but I wish they'd given me a heads up before starting a day early.”

Metal Roof Over Shingles (Retrofit)
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Victorville

“These folks installed corrugated metal roofing on our storage building out in the desert and it came out great. The heat out there is no joke and they worked through it without a single complaint. Really impressed with how fast they moved once the materials showed up.”

Commercial Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Apple Valley

“Went with standing seam for our house after getting three quotes, and Victorville Metal Roofing was the only one that actually explained the difference between the panel types instead of just pushing the cheapest option. The finished roof looks sharp and the seams are perfectly aligned. Worth every penny.”

Standing Seam Metal Roofing
Mike J.
⭐⭐⭐⭐⭐
MJ
Mike J.
Oak Hills

“Had a leak around our skylight that two other roofers couldn't figure out. These guys found the bad flashing in about ten minutes and had it sealed up the same afternoon. No more drips during the last rain, and they didn't try to sell me a whole new roof.”

Flashing, Chimney & Skylight Repair
David L.
⭐⭐⭐⭐⭐
DL
David L.
Phelan

“Brand new metal roof on our place out in the desert and we couldn't be happier. They used stone-coated steel so it matches the look of the neighborhood instead of that shiny industrial vibe. Took about a week start to finish and the cleanup was spotless, didn't find a single screw in the yard.”

Metal Roof Installation
Tom D.
⭐⭐⭐⭐
TD
Tom D.
Silver Lakes

“Our old metal roof was rusted through in spots and they replaced the whole thing, including new fasteners and fresh flashing around the vents. The crew of four knocked it out in three days flat. Only reason it's not five stars is they left a small pile of old panels by the curb that I had to haul off myself.”

Metal Roof Replacement
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Piñon Hills

“We built a new house out in the desert with xeriscaping all around, and these guys did the metal roof to match. They recommended a lighter color to cut down on heat gain and honestly the electric bill has been noticeably lower this summer. Really grateful they steered us that direction.”

Metal Roof Installation
Free Quote

Get Your Free Quote

Metal Roofing in Victorville · Response within 24h · No commitment · ☎ (760) 493-7495

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Victorville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm