Serving the Victorville area  ·  (760) 493-7495  ·  Open Mon-Sun 7am-7pm
📞 (760) 493-7495 Free Quote

Metal Roofing in Victorville, CA (92392) · Local Professionals

Victorville Metal Roofing · Fast response in Victorville and the Victorville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Victorville is a high desert town where the sun hits hard and the wind doesn't let up. From the older stucco ranches around Old Town and Mesa Linda to the sprawling tract homes in Southeast Victorville and the horse properties out in Oak Hills, every roof here takes a beating. If you live near the Mojave River or out by Spring Valley Lake, you know the drill: triple-digit summers, gusty spring winds, and the occasional monsoon downpour.

That's why homeowners in 92392 call Victorville Metal Roofing. We've seen firsthand how standing seam and stone-coated steel hold up against the elements here, and we've replaced more than a few wind-lifted shingle roofs along the I-15 corridor. When you need a roof that can handle Victorville's climate, we're the local team to call.

Metal Roofing in Victorville (92392)

Victorville's terrain is as varied as its housing stock. In the older neighborhoods like Old Town and Mesa Linda, you've got low-pitched shingle roofs on 1950s and 60s stucco ranches, often with tight lot access and mature trees that drop limbs. Out in Southeast Victorville and Mountain View Acres, the 1990s and 2000s tract homes have concrete tile or composition shingles that are now hitting the end of their lifespan. And on the big lots in Oak Hills, Phelan, and Adelanto, metal roofs are becoming the go-to for barns, shops, and custom homes because they reflect heat and stand up to wind. The sandy, gravelly ground and occasional flash floods mean proper flashing and drainage are critical, and we always account for the intense sun exposure that can warp lesser materials.

Our team has been serving Victorville and the surrounding areas for years, and we know the local building department's requirements inside and out. Whether it's a historic district review or HOA color restrictions, we handle the paperwork so you don't have to.

Our services in Victorville

How a Job Works in Victorville

Step 1: Give us a call at (760) 493-7495 or fill out our online form. We'll schedule a free on-site assessment at your convenience. Our team will inspect your current roof, check for leaks, wind damage, or worn fasteners, and discuss your options for repair, replacement, or a new metal roof. We'll also review any HOA or city requirements that might affect your project.

Step 2: Once you approve the estimate, we'll pull the necessary permits from the City of Victorville and schedule the work. On installation day, our crew arrives early to beat the heat. We take care to protect your landscaping and keep the job site tidy. If your home is in a tight spot like some of the older streets in Old Town, we'll coordinate parking and material delivery to minimize disruption. For HOA communities, we'll submit the required design approval before we order materials.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We'll walk you through the finished job, show you how to maintain your new roof, and make sure you're completely satisfied. We leave your property clean and your roof ready for the desert elements.

Metal roofing prices in Victorville depend on the material, square footage, and complexity of the job. For a typical 1,500 to 2,000 square foot home, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated panels are the most economical at $5.50 per square foot, while copper and specialty metals start at $20. Repairs like leak fixes or flashing start at $450, and screw replacement at $750. Coating and painting can extend the life of an existing metal roof for $2.50 per square foot. We always provide a free estimate with a detailed breakdown, so call (760) 493-7495 to get started.

My roof in Southeast Victorville is original from the 1990s and I'm seeing granules in the gutters. Is it time for a metal roof?
If your shingle roof is 20 to 30 years old and losing granules, it's likely near the end of its life. In Victorville's heat, shingles degrade faster than in cooler climates. A metal roof will reflect the sun, last 50 years or more, and handle the wind better. We can inspect it for free and give you a honest assessment.
A windstorm just lifted some panels on my roof in Oak Hills. Can you come out today?
We prioritize storm damage calls. Call us at (760) 493-7495 and we'll schedule an emergency inspection as soon as possible. We'll secure the area, document the damage for insurance, and provide a repair or replacement estimate.
What's the typical cost for a metal roof replacement on a 2,000 square foot house in Victorville?
For a 2,000 square foot home, expect a metal roof replacement to start around $9 per square foot, so roughly $18,000 for the base material and labor. Factors like roof pitch, number of penetrations, and whether we need to remove the old roof can increase the price. We'll give you an exact quote after a free inspection.
Do I need a permit from the City of Victorville for a metal roof installation?
Yes, most re-roofs and new installations require a permit. The City of Victorville website has information on permit requirements and fees. We handle the permitting process for you and ensure the work meets local building codes.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We're familiar with many HOAs in Victorville and can provide color samples and documentation for your HOA's architectural review. We'll coordinate with them to get approval before ordering materials, so there are no surprises.
Are you fully insured for roofing work in Victorville?
Yes, we carry general liability insurance and workers' compensation coverage. You can have peace of mind knowing our team is protected and your property is covered.
How often should I have my metal roof inspected in Victorville?
We recommend an inspection every two to three years, especially after a big windstorm or monsoon. Fasteners can loosen over time, and debris can accumulate in valleys. A quick check can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Victorville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Victorville

All your work handled by qualified professionals in Victorville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Victorville

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Victorville · Response within 24h · No commitment · ☎ (760) 493-7495

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Victorville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm