Metal roofing prices in Victorville vary based on material, roof size, complexity, and whether you need installation, repair, or replacement. Most projects range from a few hundred dollars for minor repairs to several thousand for a full roof, but we provide transparent starting prices to help you plan with confidence.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Victorville and the Victor Valley: panel systems engineered for desert heat, intense UV, high spring wind and brief monsoon storms, installed over high-temperature synthetic underlayment with proper attic ventilation and detailed flashing for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Victor Valley homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as desert heat expands and contracts the roof every day. Superior wind resistance and a cool reflective finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of sun-baked shingle, cracked tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers offer discounts for fire-resistant roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing composition shingles, with no tear-off, less waste and lower cost. Popular on the single-story stucco homes that fill the Victor Valley. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or wind-hit metal roofing: replacing panels lifted or bent by desert wind, resealing seams and penetrations, and fixing failed flashing before a monsoon downpour or winter storm becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs, with leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and parapet transitions) and fixed right, not just caulked over. Emergency tarping available after storms. |
| Screw Replacement & Re-Fastening | From $750 | The Victor Valley's big daily temperature swings expand and contract metal roofs constantly, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for carports, patio covers, barns, horse shelters and workshops across the High Desert. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-blown dust. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Victor Valley homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for spring gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish, with excellent wind performance, a fire-resistant surface, and profiles that mimic the Spanish clay tile and shake looks common on High Desert homes. Reflective colors help cut summer heat gain. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and last a century in dry desert air. Custom fabrication for the fine details older Victorville homes call for. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys and stucco transitions, the number one leak point on Victor Valley roofs when a rare storm arrives. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Wind-uplift edge fastening, ridge and eave closures and ember-resistant details for metal roofs, important where Cajon Pass and spring winds scour the High Desert and wildfire embers can blow in from the foothills. Honest guidance on whether yours needs them; snow is rare in Victorville. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, monsoon and storm damage to metal roofing: thorough documentation with photos, an honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and UV wear, wind-lift gaps and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden monsoon and winter downpours away from stucco walls and foundations on sandy, fast-draining lots, with details that handle desert dust. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, horse shelters, workshops, churches, carports and light commercial buildings across the High Desert, from Oak Hills and Phelan ranch properties to Victorville and Adelanto shops and warehouses, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and pitch : Larger roofs and steeper pitches require more materials and labor, increasing the overall cost.
- Material type : Standing seam, corrugated panels, stone-coated steel, and copper have different price points per square foot.
- Accessibility and roof complexity : Difficult access, multiple stories, or complex roof designs with valleys and dormers can raise labor costs.
- Extent of repair or replacement : Minor repairs vs. full replacement, and whether existing roofing needs removal or can be retrofitted, affects the total price.
What's included
- Travel included across the Victorville area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof dimensions, material preference, and any known issues ready before calling. A Victorville Metal Roofing estimate includes a detailed scope of work, material costs, labor, and cleanup, with no hidden fees. Call (760) 493-7495 to schedule a free inspection and receive a written quote.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to material type (e.g., corrugated steel vs. copper), roof size and complexity, labor rates, and whether removal of old roofing is needed. We provide transparent starting prices and a detailed estimate to help you understand the costs.
Do you offer free estimates?
Yes, we offer free inspections and estimates for most services, including storm damage repair. Call (760) 493-7495 to schedule your appointment.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options may be available for larger projects; please ask for details when you call.